Loading...
Serving DeLand, FL and surrounding areas. (386) 327-0080
Your pool deck is faded, cracked, or burns bare feet every summer afternoon. We resurface it with a coating built for Florida sun - slip-resistant, cooler underfoot, and ready before the season hits.
Pool deck resurfacing in DeLand means applying a fresh layer of coating over your existing concrete so it looks new, feels safer underfoot, and holds up against Florida sun and summer rain - most standard residential jobs take one to three days with a full week before normal pool use.
The old concrete stays in place. The crew cleans it, repairs any cracks, and bonds the new coating on top. That distinction matters for DeLand homeowners because a full deck tear-out is rarely necessary - even a surface that looks rough or badly faded is often a strong candidate for resurfacing once the right prep work is done. Volusia County's sandy soils do cause concrete to shift and crack more than homeowners expect, but those cracks can be filled and stabilized before coating so they do not show through the new surface. If your deck needs more than a coating - for example, if standing water has become a problem around the pool edge - our concrete sealing service addresses surface protection at a lower cost when the structure is still in good shape.
The most important part of any resurfacing job is the prep work, not the coating itself. A product applied to a poorly cleaned or unrepaired surface will peel within a season. Watching how much time a crew spends on preparation before they open a bucket of coating is the single best way to judge whether you are getting quality work.
If chunks of the surface are breaking away, the texture catches bare feet, or the concrete looks like it is crumbling from the top down, the surface has deteriorated past the point where cleaning alone helps. This kind of breakdown is common on older DeLand decks that have cycled through years of Florida sun and summer rain without a protective coating. Resurfacing now stops the deterioration from going deeper into the slab.
Hairline cracks are normal in concrete, but cracks that are widening, have uneven edges, or run in a pattern across the deck signal that the slab has been moving - which is common in DeLand's sandy soil. Left alone, water works into those cracks, the soil beneath shifts further, and the cracks grow. A resurfacing job that includes proper crack repair stabilizes the surface and keeps water from making the problem worse.
If walking from the pool to the house feels like crossing a frying pan, the surface is absorbing and holding heat rather than reflecting it. Newer coating systems are specifically designed to stay cooler in direct sun - a real improvement for a DeLand family using the pool from April through October. This is one of the most common reasons local homeowners resurface even when the deck is not structurally damaged.
If someone has slipped near the pool edge, or if the deck feels slick right after getting out of the water, the original texture has worn smooth. This is a safety issue, not a cosmetic one - especially for children and older adults. A new coating with a built-in grip texture solves the problem and gives you confidence every time the kids are running around the pool.
Every project starts with a full surface assessment - pressure washing, crack inspection, and testing for areas where old coatings are peeling or the concrete has soft spots. The finish options range from a simple solid-color texture coating to a decorative overlay that looks like travertine or flagstone at a fraction of the cost of real stone. For decks that need more than cosmetic work, our concrete floor stripping and removal service handles situations where the existing surface has to come off entirely before anything new can go down.
The most popular choice around pools in DeLand is a spray-on texture coating because it stays cooler in direct sun and gives bare feet traction even when wet. For homeowners who want a decorative finish, stamped and stenciled overlays can transform a plain concrete slab without the expense of new pavers or tile. Every finish we install includes a UV-rated sealer that is designed to handle the subtropical sun exposure DeLand gets for most of the year. If your project also includes other outdoor concrete surfaces, our concrete sealing service can protect patios, walkways, and driveways in the same visit.
For homeowners who want a cooler, slip-resistant surface that is practical for daily pool use in Florida's heat.
For those who want the look of travertine, flagstone, or tile without the cost of tearing out and replacing the existing slab.
For decks where DeLand's sandy soils have caused cracking - repairs are done before coating so cracks do not telegraph through the new surface.
For decks that are structurally sound but need a protective layer that handles Volusia County's intense sun and summer rain cycles.
Volusia County averages more than 230 sunny days per year, and pool decks in DeLand sit in direct sun for most of the day during the long summer season. That constant UV exposure bleaches out colors, dries out coatings, and causes surfaces to expand and contract with temperature swings - all of which shortens the life of a coating that was not designed for Florida conditions. When you are comparing contractors, ask specifically whether the product they use is rated for continuous UV exposure in a subtropical climate, not just general outdoor use. Florida's afternoon thunderstorm season - which runs from roughly June through September - also creates a narrow scheduling window, because coatings applied to a surface that gets rained on before they cure can blister or fail to bond. Homeowners in Edgewater and along the coast deal with an added layer of salt air exposure that accelerates coating breakdown even further.
The sandy soils common throughout Volusia County cause more cracking in pool deck slabs than homeowners expect. That movement is one of the primary reasons DeLand decks look worn after 10 or 15 years even when they have not been heavily used. Resurfacing without addressing those cracks first produces a coating that will show the same cracks within a year. We have worked on pool decks throughout DeLand and the surrounding area - including in New Smyrna Beach where coastal humidity adds another factor to the coating process - and we schedule application work for the early morning hours during summer months to avoid applying materials to a surface that is too hot, which causes uneven drying.
We ask a few basic questions about your deck - size, condition, and what you are hoping to achieve. We respond to every inquiry within 1 business day and schedule a time to see the deck in person before giving you a price.
We walk the deck, look for cracks, soft spots, and peeling areas, and talk you through the finish options that make sense for your situation. You receive a written estimate that breaks down exactly what is included - no surprises on the final invoice.
The crew pressure washes the entire deck, grinds or fills cracks, and profiles the surface so the coating has something to grip. This prep work often takes as long as the coating application itself, and it is what determines how long your finished deck holds up.
Once the surface is clean and repaired, the coating goes on in layers. After the final coat, the deck needs 24 to 72 hours for light walking and up to a full week for normal pool use. Before the crew leaves, you walk the deck together and we address any touch-ups on the spot.
Free estimate. Written quote before we start. No pressure, no obligation.
(386) 327-0080We only install coatings that are specifically formulated for continuous UV exposure in subtropical climates. A product that holds up in a mild northern state will fade and chalk in DeLand's sun within a few years - we source materials that are built for what this market actually demands.
We fill and stabilize cracks as part of every resurfacing job, not as an add-on. This is what separates a coating that lasts from one that shows the same cracks within a year. DeLand's sandy soils make this step more important here than in most other markets.
We plan application work for early mornings during summer months to avoid applying coating to an overheated surface, and we build weather delays into project timelines rather than rushing to meet a schedule and compromising the result.
Every project comes with a written warranty and a final walkthrough where you inspect the work before we consider the job done. The American Concrete Institute publishes the surface preparation standards we follow - and following them is what makes the warranty mean something.
Pool deck work in DeLand requires a contractor who understands both the local climate and the soil conditions that drive most of the cracking homeowners see. We have built our process around those local realities - from product selection to scheduling to the prep work that determines how long everything lasts.
When the existing deck surface is too far gone for resurfacing, we remove it cleanly so a fresh slab or new coating can start on solid ground.
Learn MoreProtect pool surrounds, walkways, and patios that are structurally sound but need a UV-resistant sealer to defend against DeLand's sun and rain cycles.
Learn MoreDeLand's rainy season fills contractor schedules fast - call now to lock in your project date and have your deck ready before the heat hits.